Specifications
450ml Techinglue Cartridge + 2 mixing nozzles, shrink wrapped.
Cure Characteristics
| Pot Life - 100g @ 25C (in air) |
15 mins |
| Cured to a solid state @ 25C |
8 hrs |
| Mix Viscosity mPas @ 25C |
280,000 |
| Shore D Hardness - 1 Day |
80 |
| Shore D Hardness - 2 weeks |
82 |
| HDT @ 25C - 1 Day |
41C |
| HDT @ 25C - 2 weeks |
63C |
Cured Properties
| Tensile Strength |
25-30 MPa |
| Tensile Bond Strength |
10-12 MPa |
| Compressive Strength |
60-80 MPa |
| Flexural Strength |
20-25 MPa |
Application
The surfaces to be bonded should be dry and free from any contaminants such as oil or dust. Fibreglass, timber, painted, or metal surfaces should be thoroughly sanded to provide a good key. Concrete surfaces should be wire brushed to remove laitance.
Apply sufficient mixed epoxy to one or both of the surfaces to assure intimate contact between the bonding surfaces. Excessive clamping pressures should be avoided. Components need only be held firmly to avoid movement during the curing process.
Coverage
Depending on porosity and surface roughness, one litre of mixed TECHNIGLUE-CA will cover approximately three square metres.
Cleanup
Uncured TECHNIGLUE-CA resin and hardener mixture can be cleaned up with warm water.