Ankermann :: Deltagon SDS-plus drills 166mm length

Deltagon SDS-plus drills 166mm length

Bordo's range of Deltagon SDS Plus drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits have a triple fluted head and asymetrical five cutter head (on sizes over 20mm) to minimise vibration

Product Variations

Product number	FluteLength	Length	Diameter	PackQuantity	Price
2543-5.0x166	100 mm	166 mm	5.0 mm	1	$28.52
2543-5.50x166	100 mm	166 mm	5.5 mm	1	$28.52
2543-6.00x166	100 mm	166 mm	6.0 mm	1	$28.52
2543-6.50x166	100 mm	166 mm	6.5 mm	1	$28.52
2543-7.00x166	100 mm	166 mm	7.0 mm	1	$28.52
2543-8.00x166	100 mm	166 mm	8.0 mm	1	$29.50
2543-10.00x166	100 mm	166 mm	10.0 mm	1	$35.20
2543-12.00x166	100 mm	166 mm	12.0 mm	1	$36.12
2543-13.00x166	100 mm	166 mm	13.0 mm	1	$39.00
2543-14.00x166	100 mm	166 mm	14.0 mm	1	$43.72
2543-15.00x166	100 mm	166 mm	15.0 mm	1	$55.12
2543-16.00x166	100 mm	166 mm	16.0 mm	1	$60.84
2543-18.00x166	100 mm	166 mm	18.0 mm	1	$71.32
2543-20.00x166	100 mm	166 mm	20.0 mm	1	$83.64

Applications

Exceptional Performance Drilling Bondek
Extreme Performance in Reinforcing Mesh & Bar

Features and Benefits

High durability and improved drilling speed. Extremely hard wearing for long tool life. Limited circumferential wear.
Tungsten carbide head is permanently bonded to shank – not brazed. This results in extended bit life by eliminating bit failure due to excessive heat melting brazing material.
Drills through reinforcing mesh and reinforcing bar. Easily drills through all typical steel decking plate including Bondek®.
Minimised bit binding against reinforcing bar – increasing operator safety.
Triple thread shank for improved dust extraction. Reduced vibration minimising operator fatigue. The Delta Shank, on small size Deltagon drills, has a triangular cross section and provides exceptional resistance to bending. The Delta Shank provides efficient dust extraction without the need for conventional flutes (sizes 6mm and smaller).

Related Products

Deltagon SDS-plus drill 5.0x166mm

Bordo's range of Deltagon SDS Plus drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits have a triple fluted head and asymetrical five cutter head (on sizes over 20mm) to minimise vibration