Ankermann :: Deltagon SDS Max Drills - 305

Deltagon SDS Max Drills - 305 - 540mm length

Bordo's range of Deltagon SDS Max drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits have a triple fluted head and asymetrical five cutter head (on sizes over 20mm) to minimise vibration

Product Variations

Product number	FluteLength	Length	Diameter	PackQuantity	Price
2549-10.00X305~0	200 mm	305 mm	10 mm	1	$120.06
2549-10.00X540~0	400 mm	540 mm	10 mm	1	$197.09
2549-12.00X305~0	200 mm	305 mm	12 mm	1	$122.33
2549-12.00X540~0	400 mm	540 mm	12 mm	1	$199.36
2549-14.00X305~0	200 mm	305 mm	14 mm	1	$133.66
2549-14.00X510~0	400 mm	510 mm	14 mm	1	$203.89
2549-14.00X540~0	400 mm	540 mm	14 mm	1	$203.89
2549-15.00X305~0	200 mm	305 mm	15 mm	1	$135.93
2549-16.00X305~0	200 mm	305 mm	16 mm	1	$138.20
2549-16.00X540~0	400 mm	540 mm	16 mm	1	$208.42
2549-18.00X340~0	200 mm	340 mm	18 mm	1	$167.65
2549-18.00X540~0	400 mm	540 mm	18 mm	1	$212.95
2549-20.00X340~0	200 mm	340 mm	20 mm	1	$190.30
2549-20.00X540~0	400 mm	540 mm	20 mm	1	$226.54
2549-22.00X340~0	200 mm	340 mm	22 mm	1	$222.02
2549-22.00X540~0	400 mm	540 mm	22 mm	1	$280.92
2549-24.00X380~0	260 mm	380 mm	24 mm	1	$249.35
2549-24.00X520~0	400 mm	520 mm	24 mm	1	$294.68
2549-25.00X520~0	400 mm	520 mm	25 mm	1	$335.29
2549-25.00X380~0	260 mm	380 mm	25 mm	1	$271.86
2549-26.00X520~0	400 mm	520 mm	26 mm	1	$340.02

Applications

Exceptional Performance Drilling Bondek
Extreme Performance in Reinforcing Mesh & Bar

Features and Benefits

High durability and improved drilling speed. Extremely hard wearing for long tool life. Limited circumferential wear.
Tungsten carbide head is permanently bonded to shank – not brazed. This results in extended bit life by eliminating bit failure due to excessive heat melting brazing material.
Drills through reinforcing mesh and reinforcing bar. Easily drills through all typical steel decking plate including Bondek®.
Minimised bit binding against reinforcing bar – increasing operator safety.
Triple thread shank for improved dust extraction. Reduced vibration minimising operator fatigue. The Delta Shank, on small size Deltagon drills, has a triangular cross section and provides exceptional resistance to bending. The Delta Shank provides efficient dust extraction without the need for conventional flutes (sizes 6mm and smaller).

Related Products

Deltagon SDS Max Hmr Drill - 10x305mm

Bordo's range of Deltagon SDS Max drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits have a triple fluted head and asymetrical five cutter head (on sizes over 20mm) to minimise vibration